Lantech LPES-2208CA Скачать руководство пользователя страница 100

Страница: 100 / 135

802.1Q Configuration



Pull down the selection item and focus on

802.1Q

then press

Apply

to set the

VLAN Operation Mode in

802.1Q

mode.



Enable GVRP Protocol:

GVRP (GARP VLAN Registration Protocol) is a protocol

that facilitates control of virtual local area networks (VLANs) within a larger network.

GVRP conforms to the IEEE 802.1Q specification, which defines a method of

tagging frames with VLAN configuration data. This allows network devices to

dynamically exchange VLAN configuration information with other devices. For

example, having enabled GVRP on two switches, they are able to automatically

exchange the information of their VLAN database. Therefore, the user doesn

‘t need

to manually configure whether the link is trunk or hybrid, the packets belonging to

the same VLAN can communicate across switches. Tick this checkbox to enable

GVRP protocol. This checkbox is available while the VLAN Operation Mode is in

802.1Q

mode.



Management VLAN ID:

Only when the VLAN members, whose Untagged VID

(PVID) equals to the value in this column, will have the permission to access the

switch. The default value is

‗0‘ that means this limit is not enabled (all members in

different VLANs can access this switch).



Select the port you want to configure.



Link Type

: There are 3 types of link type.



Access Link:

A segment which provides the link path for one or more stations

to the VLAN-aware device.

An Access Port (untagged port), connected to the

access link, has an untagged VID (also called PVID). After an untagged frame

gets into the access port, the switch will insert a four-byte tag in the frame. The

contents of the last 12-bit of the tag is untagged VID. When this frame is sent

out through any of the access port of the same PVID, the switch will remove the

tag from the frame to recover it to what it was. Those ports of the same

untagged VID are regarded as the same VLAN group members.

Note: Because the access port doesn

‟t have an understanding of tagged frame, the

column field of Tagged VID is not available.

Содержание LPES-2208CA








































































































































Результаты поиска

Содержание LPES-2208CA

Отзывы:

Похожие инструкции для LPES-2208CA

Бренды по названию

Популярные бренды

Lantech LPES-2208CA, Руководство пользователя

Результаты поиска

Содержание LPES-2208CA

Отзывы:

Похожие инструкции для LPES-2208CA

Бренды по названию

Популярные бренды