Lantech LGS-2300-RPS, Руководство пользователя

Страница: 69 / 92

61
faults include excessive cable length and too many repeaters (hubs) between end
nodes. In addition, you should make sure that your network topology contains no data
path loops. Between any two ends nodes, there should be only one active cabling path
at any time. Data path loops will cause broadcast storms that will severely impact your
network performance.
Diagnosing LED Indicators
The Switch can be easily monitored through panel indicators, which describes
common problems you may encounter and where you can find possible solutions to
assist in identifying problems.
If the power indicator is not lighted when the power cord is plugged in, you may have a
problem with power outlet, or power cord. However, if the switch powers off after
running for a while check for loose power connections, power losses or surges at
power outlet. If you still cannot resolve the problem, contact your local dealer for
assistance.