Lantech IWP-2000-68 Скачать руководство пользователя страница 37

Страница: 37 / 235



View

Create a view for user to let the groups have rights to view the MIB
tree.

Index: Index of View. Tick the checkbox to enable the recordset.
View Name: The name of view.

Include: Assign include or exclude in this record for certain
subtree.

Sub Tree: the OID value. For example: ‘1.3.6.1.2.1’

Figure 3-2-29



Access

The Access table grants the groups access right to certain views.

Each group can have multiple access rights. The most secure
access right is chosen.

Index: Index of Access. Tick the checkbox to enable recordset.
Group:

Returned and lookup the ‘Group Name’ from the Group

table.

Security model:

Specified in the message's msgSecurityModel

parameter. The available options for this field are: any, v1, v2c

and usm.
Security level:

Specified in the message's msgFlags parameter.

The available options for this field are: NoauthNoPriv, AutoNoPriv
and AuthPriv

Read: Specified in the message's msgSecurityModel parameter.
The available options for this field are: all, none, mib2 and the

‘View Name’ from View table.
Write: Authorized View Name for write access. The available

options for this field are: all, none, mib2 and the ‘View Name’ from
View table.

Notify: Authorized View Name for notify access. The available
options for this field are: all, none, mib2 and the ‘View Name’ from

View table.

Содержание IWP-2000-68












































































































































































































































Результаты поиска

Содержание IWP-2000-68

Отзывы:

Бренды по названию

Популярные бренды

Lantech IWP-2000-68, Руководство пользователя

Результаты поиска

Содержание IWP-2000-68

Отзывы:

Бренды по названию

Популярные бренды