12
up to
30km
.
Fiber segment using
multi-mode
connector type must use 50 or
62.5/125 µm multi-mode fiber cable. User can connect two devices
up to
2km
distances.
Gigabit / 100M SFP port:
The small form-factor pluggable (SFP) is a compact optical transceiver
used in optical communications for both telecommunication and data
communications. The SFP slots supporting Gigabit speed up to
1000Mbps.
–DSFP/-DFT models support dual speed 100M or 1000Mbps.
They are used for connecting to the network segment with single or
multi-mode fiber. You can choose the appropriate SFP transceiver to plug
into the slots. Then use proper multi-mode or single-mode fiber according
to the transceiver. With fiber optic, it transmits at speed up to 1000 Mbps
or dual speed (-DSFP/-DFT models) and you can prevent noise
interference from the system.
To connect the transceiver and LC cable, please follow the steps shown
below:
First, insert the transceiver into the SFP module. Notice that the triangle
mark is the bottom of the module.
Transceiver to the SFP module
