12
Chapter 3 Hardware Installation
3.1Hardware installation
For PoE models: If this switch needs to uplink with another switch via a PoE
copper port, please make sure the uplink port on the other unit is a none-PoE
interface. You may also contact our sales team to confirm if the switch supports
power isolation.
It is recommended when installing an Ethernet switch without PoE isolation, and
you intend to use this function then a DC-DC galvanic isolated converter should
be used in between the train power supply and the switch.
3.1.1Unpack switch and check the accessory with packing content list
3.1.2 Mount the switch on desired position. For the best ventilation, it is
suggested to mount the switch on metallic surface.
3.1.3 Connect the M23/M12 connector of power input. The PoE power
supply for IPES-0208 series is connected via a 5-pole M23 female
connector.
Voltage of Power Input
Non-PoE model
12V model:
The power input voltage can be from
9.5V to 56VDC
72V model:
The power input voltage can be from
50.4V to 90VDC
110V model:
The power input voltage can be from
43V to 137.5VDC
PoE model
12V model:
