13
Chapter 3 Hardware Installation
3.1Hardware installation
3.1.1Unpack switch and check the accessory with packing content list
3.1.2 Mount the switch on desired position. For the best ventilation, it is
suggested to mount the switch on metallic surface.
3.1.3 Connect the M23/M12 connector of power input. The PoE power
supply for IPES-0008B series is connected via a 5-pole M23 female
connector while IES-0008B is with a 5-pole M12 female connector.
Voltage of Power Input
For IPES-0005B/0008B-12V series, the power input voltage can
be from 9.5V to 57VDC to feed power on both the 802.3af and
802.3at standardized devices.
With IPES-0005B/0008B-72V series, the power input voltage can
be from 72V to feed power on both 802.3af/at standardized
devices. IES-0008B series can accept power input ranging from
50.4V~90V to be powered.
Please make sure that the external power supply unit you use to
provide the PoE voltage meet the following criteria:
The output voltage of power supply must exceed 48VDC for 802.3af
and 53VDC for 802.3at operation(with IPES-0005B/0008B-72V, only
72VDC can power both the 802.3af and 802.3at PD.)
The power consumption can satisfy the total power request from all
PD devices required.
