Lantech IES-3 Series, Руководство пользователя

Страница: 11 / 26

10
Chapter 3 Hardware Installation
For POE models: Do not
use units’ POE ports to uplink to another POE switch in vehicle
applications. (May Cause Damage) Lantech strongly advise the installation of a Galvanic isolated
DC/DC converter between the power supply and the Ethernet switch on all Non-Isolated models.
Please contact the sales team for advice on which models support isolated power design.
3.1.
Hardware installation
1. Unpack the Industrial switch
2. Check if the DIN-Rail is screwed on the Industrial switch or not. If the DIN-Rail is not
screwed on the Industrial switch, please refer to DIN-Rail Mounting section for DIN-
Rail installation. If users want to wall mount the Industrial switch, please refer to Wall
Mount Plate Mounting section for wall mount plate installation. NOTE: Wall mount
kits are optional accessories.
3. To hang the Industrial switch on the DIN-Rail track or wall.
4. Power on the Industrial switch. Please refer to the Wiring the Power Inputs section
for knowing the information about how to wire the power. The power LED on the
Industrial switch will light up. Please refer to the LED Indicators section for indication
of LED lights.
Note: Please check the power connector has been connected to the switch correctly
before you turn on the power resource.
5. Prepare the twisted-pair, straight through Category 5 cable for Ethernet connection.
6. Insert one side of RJ-45 cable (category 5) into the Industrial switch Ethernet port
(RJ-45 port) and another side of RJ-
45 cable (category 5) to the network device’s
Ethernet port (RJ-45 port), ex: Switch PC or Server. The UTP port (RJ-45) LED on