www.lanpro.com
Active Products - Switches - User Guide for the LP-SW511 and LP-SW811, 5 and 8 Port
10/100 Mbps Desktop Switches.
1. The Power LED is not lit
2. The Link/Act LED is not lit when a device is connected to the corresponding port
Environmental and Physical
Appendix B: Troubleshooting
5
10Base-T
14880pps/Port
Frame Filter Rate
100Base-Tx: 148800pps/Port
10Base-T: 14880pps/Port
Frame Forward Rate
100Base-Tx: 148800pps/Port
Operating Temperature 0
0ºC ~40ºC (32º
F
~104º
F
)
Storage Temperature
-40ºC ~70º
C
(-40º
F
~158º
F
)
Operating Humidity
10%~90% non-condensing
Storage Humidity
5%~90% non-condensing
Check to see if the power cord is connected to the Switch properly, and make sure the power source is ON.
Check to see if the cable connectors are firmly plugged into the Switch and the device, and verify the connected device
is turned on and working well. Make sure the cable is not longer than 100 meters (328 feet).
6
