www.lanpro.com
Active Products - Switches - User Guide for the LP-SW511 and LP-SW811, 5 and 8 Port
10/100 Mbps Desktop Switches.
3.1 Front Panel
3.2 Rear Panel
This Chapter describes the front panel, rear panel and LED indicators of the Switch.
Figure 3-1 The LP-SW811 Switch Rear Panel. The Switch’s LEDs are located on the front panel.
Figure 3-2 The LP-SW811 Switch Rear Panel. The following parts are located on the rear panel:
Chapter 3. Identifying External Components
Appendix A: Specifications
3
4
Standards
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX
Topology
Star
Protocol
CSMA/CD
Ethernet:
10 Mbps (Half Duplex), 20 Mbps (Full Duplex)
Data Transfer Rate
Fast Ethernet: 100 Mbps (Half Duplex), 200 Mbps (Full Duplex)
10Base-T
UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568
100Ω STP (maximum 100m) Network Media (Cable)
100Base-TX
UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
Number of Ports
5/8 10/100 Mbps Auto-Negotiation RJ45 ports
LED indicators
Power, 10/100 Mbps Link/Act
Transfer Method
Store-and-Forward
MAC Address Learning
Automatically learning, automatically aging
1
2
3
4
5
6
7
8
Power LED
: This indicator will light up when the Switch powers on.
LEDs (1-8)
: One LED indicator will light green when a device is connected to the corresponding port. It flashes
when data is being transmitted or received on the connection.
Power:
The Power socket is where you will connect the power adapter. Please use the power adapter provided
with this LP-SW811.
Port (1-8):
The LP-SW811 Switch is equipped with 8x10/100 Mbps Auto-Negociation RJ45 ports where you
will connect your network devices. The working status can be indicated by the corresponding LEDs on the front
panel.
5
