www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-349 123 Manual in AP Mode
14
It is important to mention that all the VAP’s will share the
set of Keys in WEP, being only able to change the key for
authentication and encryption to be used by default. In order
to enable another VAP, you must set:
Enable
and then:
Apply
as shown in figure 14, then proceed to configure the
security by repeating paragraphs 11, 12 and 13 for this VAP.
Figure 14
15
In the window shown in figure 15, proceed to change the
administration password of the equipment. Even though it
is not mandatory, we highly recommend that you change
the administration password of your equipment. We must
remind you to store it in a safe place to which you can
have access in the event that you forget it. If you lose
it, you must reset the equipment to factory values and
lose any setup you have made. Please use for this the
123 manual on how to reset to factory values, document:
LP348_M123_ENC01W.
In order to change the password, please select option:
Change Password
, located in the menu:
Management
as shown in the figure 15.
Figure 15
16
Figure 16
6
In the window shown in figure 16, input in:
Current
Password
the old password, in:
New Password
, the
new password you want to use, in the field:
Repeat New
Password
, do as indicated and the select:
Apply
.
