www.lanpro.com
Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for PtP and PtMP Modes setup
The following instructions will let you configure your LP-289ai in PtP and PtMP Modes.
It is highly recommended to draw a detailed configuration diagram like the example shown in figure 1, in which 3 equipment
in a PtMP connection will serve as a guide for you to their configuration, please remember that each equipment has a
unique MAC address that you will require later when setting up this type of configuration.
Figure 1
1
2
After executing the installation 123 Manual(B01) please
proceed to configure it by first connecting the cable coming
from the LP-289ai to the PoE injector port named:
To Odu
as shown in figure 2.
2
Figure 2
