www.lanpro.com
Wireless - Equipment - 5.8 GHz - LP-289ai 123 Assembly and Setup Manual
Proceed to cut the excess wire and and insert the plug as shown in figure 14, use the proper crimp-tool as
shown.
Figure 14
d
Connect the end of the cable to the LP-289ai , slide the components and screw tightly as shown in figure 15:
Figure 15
e
The other end of the cable must be connected to the: To ODU output of the PoE injector.
f
Please remember that the PoE injector is not weatherproof, hence it must be in a safe and weather protected
enclosure or inside the premises. A conduit to carry the cable to the radio is highly recommended.
g
5
