HD62 User Manual
KS064300G4-Ver1.1
- 4 -
1. Monitor
2. Focus knob
3. Buttons
4. Switch
5. Monocular microscope
6. Magnification
adjustment ring
7. Base
8. TF card slot
9. HDMI port
10. Reset
11. USBport
12. Monitor switch
13. USB power supply
interface
14. HDMI interface
15. Wired controller
interface
12.5"monitor
，
For image display and USB power supply
interface.
Rotate the knob to implement the focus function; Rotate
clockwise: back focal length decreases and object
distance increases; Rotate anticlockwise: back focal
length increases and object distance decreases.
In HDMI mode, 5 buttons can match to each other to
achieve different functions.
Put the switch to right: turn on the digital camera; put the
switch to left: turn off the digital camera.
Electronic eyepiece adopts standard C port. You can adjust
the magnification ratio of the microscope according to
requirements to realize object observation under different
magnification ratio
Adjustment range 0.7-5 times.
Aluminum alloy base with scratch-resistant film on the
surface.
The location of TF card, photos and videos will be stored in
TF card.
Connect to the monitor with HDMI cable for signal
transmission.
Press and hold for more than 3 seconds to restore factory
settings.
Used for the connection between the camera and the
monitor, which supplies power to the camera
.
When the switch is turned up, the monitor is turned on;
when the switch is turned down, the monitor is turned off
(the digital camera stops working after the monitor is
turned off).
It is a 5V 2A power output interface,
provide-power
to
digital camera through USB cable.
Connect to the digital camera through HDMI
cable to receive the signal from digital camera.
Connect to the wired controller which is an optional
accessory to adjust parameters of the monitor.
