Chapter 5 Product Assembly Guide
5.1 Camera Assembly
5.1.1 Assembly with microscope
Loosen the fixing screw of the microscope.
Remove the eyepiece part of the microscope.
1
．
Separate eyepiece part from objective part as shown in figure 1
1.
2.
User's Manual | HC4K Embedded USB Camera
www.lanoptik.com
- 5 -
Figure2
Figure3
Place the Digital Camera on the top of the microscope objective.
Tighten the fastening screw.
2
．
Assembly the Digital Camera as shown in figure 2
1.
2.
Place the eyepiece part of the microscope to the female interface of the Digital Camera.
Tighten the fastening screw.
3
．
Assemble eyepiece part of the microscope as shown in figure 3
1.
2.
4
．
Connect the HC4K camera to the USB port of computer, run the software and start using it.
Please refer to User Manual of Pixit Pro for software operations.
Figure1
5.1.2 Disassembly the Camera
Reverse the assembly sequence.
