Lanner ICS-P570, Руководство пользователя

Страница: 14 / 63

ICS-P570 User Manual
14
The pin headers on the motherboard are often associated with important functions. With the shunt (Jumper)
pushed down on the designated pins (the pin numbers are printed on the circuit board, surrounding the pin
header), certain feature can be enabled or disable. When changing the jumpers, make sure your system is
completely turned off.
1. J10 : LPC1114 Burn Select
Jumper Description
1-2 (Default) Normal
2-3 Burn Mode
2. JCMOS1 : Clear CMOS
Jumper Description
1-2 (Default) Normal
2-3 Clear CMOS RAM
3. SEL1 : Hardware / Software Select
Jumper Description
1-2 Software Reset
2-3 (Default) Hardware Reset
4. PWR1: Power On / Off
Jumper Description
1-2 Power On/Off
2-3 (Default) Normal
1. BAT1 : Battery Connector
Pin No. Description Pin No. Description
1 VDD_3.3V_BAT 2 GND
2. JSPI1 : SPI ROM Pin Header
Pin No. Description Pin No. Description
1 V1P8_A_SPI 2 GND
3 SPI0_CS_N 4 SPI0_CLK
5 SPI0_MISO 6 SPI0_MOSI
7 NC 8 SPI0_HOLD_#