30
Bios Settings
Chapter 4
Network Application Platforms
You can enable or disable the automatic activation of
hardware Lan Bypass function in the event of a power
failure. Hardware Bypass can automatically activate to
allow network traffic to continue.
Restore on AC Power Loss
This option lets you set the state of the system when it has
just recovered from a power outage.
Option
Description
Power Off
When setting to Power Off, the system goes into
“off state” after an AC power interruption.
Power On
When setting to Power on, the system turns on
automatically after a power interruption
Last State
When setting to Last State, the system goes
into whatever the state was before the power
interruption.
SB LAN PXE ROM
This option let you enable or disable the LAN Preboot
eXecution Environment which allows booting computers
by using a network interface independently of available
data storage devices. Select from the listed LAN ports to
enable this function. SB LAN means the Management port
; Lan 1 to 6 means the Gigabit Ethernet ports 1 to 6. For
the description of the physical ports, refer to the