8
Hardware Setup
Chapter 2
Network Application Platforms
consideration of equipment nameplate ratings
should be used when addressing this concern.
Reliable Earthing - Reliable earthing of rack-
5.
mounted equipment should be maintained.
Particular attention should be given to supply
connections other than direct connections to the
branch circuit (e.g. use of power strips).”
CAUTION :
Rail/rack mounted equipment is not
to be used as a shelf or a work space.
To mount the FW-7541 onto the rack, use the mounting
kit with the screw pack. Follow the following procedures
as a guideline:
Place the FW-7541 on the rack mounting bracket and
1.
fix it to the bracket by using the flat head screws in the
screw pack.
Place the power adaptor in the adaptor slot and attach
2.
the cable holder (with threaded oval-head screws)
provided to the rack mounting bracket. Make sure
that the power adaptor socket is not blocked by the
aligning holder in the front.
You could use the cable holder to hold your cable
3.
to prevent it from tangling as shown in the picture
below.
Connecting Powers
Follow theses procedures to power up the FW-7541:
Connect one end of the power adapter to the DC jack
1.
of the FW-7541 first.
Connect the other end of the power cord to the DC
2.
power adapter.
Lastly, connect the power cord to an electrical outlet.
3.
CAUTION:
Leave space around your power
adapter. Do not use this device in a location where
airflow around the power adapter or computer
is not sufficient. Always disconnect the power
adapter before opening the computer to perform
procedures such as installing memory or removing
the hard disk.
Note:
Bracket mounting screws for mounting the
bracket onto the rack equipment are not included.
The original screw pack is for fixing system on the
bracket.
