Lanner electronics MB-X63 Series, Руководство пользователя, Страница: 29 / 47

25
IDE Secondary Slave
IDE HDD Auto-Detection Press Enter Item Help
Menu Level
IDE Secondary Slave Auto
Access Mode Auto
Capacity 0 MB
To auto-detect the HDD’s
size, head…on this channel
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
á â àß
Move Enter: /-/PU/PD: Value F10: Save ESC: ExitF1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Here is a brief explanation of drive specifications:
l
Access Mode: The settings are Auto, Normal, Large, LBA.
l
Cylinder: Number of cylinders
l
Head: Number of heads
l
Precomp: Write precom
l
Landing Zone: Landing Zone
l
Sector: Number of sectors
Drive A and Drive B : Select the correct specifications for the diskette drive(s) installed in the
computer.
None
No diskette drive installed
360K, 5.25 in 5-1/4 inch PC-type standard drive; 360 kilobyte capacity
1.2M, 5.25 in 5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity
720K, 3.5in 3 1-2 inch double-sided drive; 720 kilobyte capacity
1.44M, 3.5 in 3 1-2 inch double-sided drive; 1.44 megabyte capacity
2.88M, 3.5 in 3 1-2 inch double-sided drive; 2.88 megabyte capacity
Note : 1. Not Installed could be used as an option for diskless workstations..
2. Highlight the listing after each drive name and select the appropriate entry.
Video : Select the type of primary video subsystem in your computer. The BIOS usually detects the correct
video type automatically. The BIOS supports a secondary video subsystem, but you do not select it in
Setup.
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array.
For EGA, VGA, SEGA, SVGA or PGA monitor adapters.
CGA 40 Color Graphics Adapter, power up in 40 column mode
CGA 80 Color Graphics Adapter, power up in 80 column mode
MONO Monochrome adapter, includes high resolution monochrome adapters
Halt On :
During the power-on-self-test (POST), the computer stops if the BIOS detects a hardware
error. You can tell the BIOS to ignore certain errors POST and continue the boot-up process. These
are the selections:
No errors
Whenever the BIOS detects a non-fatal error the system will not be
stopped and you will be prompted
All errors The system boot will be stopped for any error that may be detected.
All, But Keyboard The system boot will not stop for a keyboard error ; it will stop for all
Other errors.
All, But Diskette The system boot will not stop for a disk error ; it will stop for all other
Errors.
All, But Disk/Key The system boot will not stop for a keyboard or disk error ; it will stop
for all other errors.