AWARD BIOS SETUP
~ 35 ~
Primary Master / Primary Slave
Secondary Master / Secondary Slave:
Press PgUp /
<
+
>
or PgDn /
<->
to select Manual,
None, Auto type. Note that the specifications of your drive must match with the drive
table. The hard disk will not work properly if you enter improper information for this
category. If your hard disk drive type is not matched or listed, you can use Manual to
define your own drive type manufally.
If you select Manual, related information is asked to be entered to the following items.
Enter the information directly from the keyboard. This information should be provided in
the documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be
“None”
If the controller of HDD interface is CD-ROM, the selection shall be
“None”
Here is a brief explanation of drive specifications:
l
Access Mode:
The settings are Auto, Normal, Large, LBA.
l
Cylinder:
Number of cylinders
l
Head:
Number of heads
l
Precomp:
Write precom
l
Landing Zone:
Landing Zone
l
Sector:
Number of sectors
