manualshive.com logo in svg

Lanner electronics EM-9560 Series, Руководство пользователя, Страница: 43 / 54

Поделиться
Скачать
Lanner electronics EM-9560 Series Скачать руководство пользователя страница 43

                                                                                                                                                    Chapter  3    BIOS  Setup 

Video Off Option: This option is for choosing the setting in which the monitor will turn off.    The default 
setting is “Suspend”. 

Always On 

Always turn on. 

Suspend 

During Suspend mode, the monitor will be turned off. 

All Modes 

During All Modes mode, the monitor will be turned off. 

 
Video Off Method: This determines the manner in which the monitor is blanked.    The default setting is 
“V/H SYNC+Blank”. 

V/H SYNC+Blank 

This selection will cause the system to turn off the vertical and horizontal 
synchronization ports and write blank to the video buffer. 

Blank Screen 

This option only writes blanks to the video buffer. 

 
Soft-Off by PWR-BTN: When you select Instant Off or Delay 4 Sec., turning the system off with the on/off 
button places the system in a very low-power-usage state, either immediately or after 4 seconds, with only 
enough circuitry receiving power to detect power button activity or Resume by Ring activity. 

 

PwrOn After AC Power Loss: This option specifies the Power ON/OFF Status after AC power loss.

 

 

39 

User’s Manual

 

Содержание EM-9560 Series























































Отзывы:

Нет отзывов