background image

C

OPYRIGHT

©

                                                              

 

 

This document is a copyright of the original manufacturer, 2000.  The original manufacturer reserves the 

right to make improvements to the product(s) described in this manual at any time without notice.  This 

manual may not, in whole or in part, be photocopied, reproduced, transcribed, translated, or transmitted in 

whatever form without the written consent of the manufacturer, except for copies retained by the purchaser 

for backup purposes.  All rights are reserved. 

 

TRADEMARKS                                                              

 

 

Geode

TM

 is a registered trademark of NS Corporation. 

 

The following are trademarks or registered trademarks of their respective companies: IBM, Intel, AMD, 

Cyrix,NS, Award, AMI, Microsoft, Windows, Windows NT, Novell, SCO, PC/104, PICMG, ALI, UMC, 

SMC, Winbond. Products mentioned in this manual are mentioned for identification purposes only.  All 

names of products or services appearing in this manual are the trademarks or registered trademarks of 

their respective organizations and companies.   

 

ã

 Copyright 2000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                         Ver. No. 

V1.0 

      

                                                LEI-UM-EM535-000 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Date : 2000/05/06

Содержание EM-535 Series






































































Отзывы: