Lanix LX14, Руководство пользователя

Страница: 9 / 31

9
PIN
PIN (Personal Identification Number) is used to prevent your SIM card from being used illegally. PIN is usually
provided with SIM card together. If you input wrong PIN for continuous three times, please input PUK to unlock it.
Please contact with network operator for more details.
PIN 2
You need to input PIN2 when entering some functions (such as call charge); if you input wrong PIN2 for continuous
three times, you need to input PUK2 to unlock it. Please contact with network operator for more details.
PUK
When changing the locked PIN, you need to input PUK (Personal Unlock Key). PUK is provided with SIM card
together. If it is not provided, please contact with your service provider. If you input wrong PUK for continuous ten
times, the SIM card can't be used again. Please contact with your service provider to buy new card. You can't
change PUK. If you lose the code, please contact with your service provider.
PUK2
When changing the locked PIN2, you need to input PUK2. If you input wrong PUK2 for continuous ten times, you
can't the functions that need PIN2. Please contact with your service provider to buy new card. You can't change
PUK 2. If you lose the code, please contact with your service provider.
Insert T flash card
Slip the cover according to the "Open " arrow to open the cover, and then put into the card. Slip the cover
according to the "Close" arrow to lock the cover.
Charging the battery
Battery level indicator
™
Your mobile phone can monitor and display information about the battery.
™
In the normal circumstances, you can know the battery capacity from the battery icon displayed on the upper
right corner of the screen.
™
When the battery is too low, "low battery" will show on the screen, also issued a warning alert tone if you
choose alert tone in any mode ‐ a warning tone by profile setup.
™
When you charging, the battery icon will change until the battery is full.
Use the travel charger
™
Insert the battery to the phone before you charging the battery.
™
Connect the travel charger adapter and handset charge slot; Certainly must guarantee inserts well.
™
Connect the travel charger to the plug.
™
It is normal phenomenon that the battery getting a little heat when you charging.
™
When finish charging, the icon of battery will stop change.
Note:
™
Please ensure the charge plug, USB plug is in right plugging directions, otherwise it can't be charged or cause
some other troubles.
™
Must ensure the voltage and power of your charger match the local standard frequency and voltage.
In order to enable the battery to achieve the optimum performance, please observe following rule:
™
Only use the approved batteries and charger.
™
Please switch off the phone before you remove the battery.
™
Charging the battery until full if it is new battery or not use for long time. If the battery is too low and can't
switch on the phone, the battery icon only will be able to change after charging a long time.
™
Keep the battery at room temperature or near room temperature when charging.
™
Do not use the battery if there's any smell or overheating during charging, using or storing, or the batteries is