Lanier LP 036c, Руководство по эксплуатации

Страница: 21 / 255

Operating Instructions Client Reference
20
Installing the PCL 5c or RPCS Printer Driver
Preparation
To use the print server, install the printer driver by selecting "Network printer server", and then select
the Windows 2000, Windows XP or Windows NT 4.0 shared printer. For more information about how
to install and setting, see the Administrator Reference.
This section assumes that the client has already been configured to communicate with a Windows
2000, Windows XP or Windows NT 4.0 print server. Do not begin the following procedure until the
client has been set up and configured correctly.
AAAA
Close all applications that are running.
BBBB
Insert the CD-ROM into the CD-ROM drive.
Auto Run will start the installer.
Important
❒
Never have two versions of the same printer driver installed on your system at the same time.
When upgrading to a new version of the printer driver, delete the old version, and then install the
new one.
Note
❒
Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe"
located on the CD-ROM root directory.
CCCC
Select a language to change the interface language, and then click [ OK ] .
The following languages are available: Cestina (Czech), Dansk (Danish), Deutsch (German), Eng-
lish (English), Espanol (Spanish), Francais (French), Italiano (Italian), Magyar (Hungarian), Neder-
lands (Dutch), Norsk (Norwegian), Polski (Polish), Portugues (Portuguese), Suomi (Finnish),
Svenska (Swedish)