manualshive.com logo in svg

Lanier LD225, Руководство по факсу

Поделиться
Скачать
Lanier LD225 Скачать руководство пользователя страница 40

Communication Information

30

3

❖

For Internet Fax destinations

At time of transmission, it shows the
e-mail address or name programmed
in the destination list. At time of re-
ception, it shows the e-mail address of
the sender.
At time of broadcasting transmission,
it shows the number of destinations
after the e-mail addresses or names of
destination.

Note

❒

When documents are transmitted
from the computer to the machine,
--LAN-Fax --> appears. To check if
the documents are sent to the re-
ceiver, confirm the same File No.

❖

For IP-Fax destinations

Shows the IP-Fax destination or name
programmed in the destination list.
The fax destination details appear on
the reception report.

❖

For Folder destinations

Shows the name programmed in the
destination list for forwarding.

6.

Communication mode

• For fax transmissions and receptions

After “T” for outgoing faxes or “R” for
incoming faxes, the communication
mode appears in alphabetical letters
or symbols. If the optional extra G3 in-
terface unit is installed, “G3-1”, “G3-
2”, or “G3-3” appears.

• For Internet Fax transmissions and re-

ceptions 
After  , and “T” for outgoing e-mail
or “R” for incoming e-mail, the com-
munication mode appears in alpha-
betical letters or symbols. Outgoing e-
mail set for Reception Notice of E-mail
Options is indicated by a “Q”, where-
as “A” appears with reception notice
e-mails.

• For IP-Fax transmissions and receptions

After 

, and “T” for outgoing faxes

or “R” for incoming faxes, the com-
munication mode appears in alpha-
betical letters or symbols.

• For forwarding to the folder destinations

Shows   (folder mark).

7.

Communication time

Shows time taken for transmissions or re-
ceptions.

8.

Number of pages

Shows the number of pages transmitted
or received.

9.

Communication result

Shows the result of transmissions or re-
ceptions.
OK: All pages were properly transmitted
or received. When Reception Notice is ac-
tivated using the Internet Fax E-mail Op-
tions, receipt of Reception Notice is shown.
The results of received documents that
were routed are preceded by “+”. 
--: The Internet Fax document was sent to
the mail server programmed in this ma-
chine. (However , this does not mean the
e-mail was delivered.) When using LAN-
Fax, the results of communication from a
computer to this machine are shown.
Error: A communication error occurred.
D: Power was disconnected during com-
munication. Not all fax documents were
transmitted.

10.

User name

Shows the sender's name.

11.

File number

Shows file management numbers.

RussianC4-EN_Combine-F_FM.book  Page 30  Tuesday, April 5, 2005  8:22 PM

Содержание LD225













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды