Lanier LD225, Сетевое руководство

Страница: 62 / 150

Using a Printer Server
56
3
Setting Up as a Print Server
(NetWare 4.x, 5 / 5.1, 6 / 6.5)
Follow the procedure below to con-
nect the machine as a print server us-
ing NetWare 4.x, NetWare 5 / 5.1, or
NetWare 6 / 6.5.
If TCP/IP and IP address is set, con-
figure using Web Image Monitor.
If IPX is set, configure using NIB Set-
up Tool.
Important
❒
When using the printer as a print
server in NetWare 4.x, NetWare 5
/ 5.1, or NetWare 6 / 6.5, set it to
the NDS mode.
❒
When using NetWare 5 / 5.1 or Net-
Ware 6 / 6.5, set the printer as a print
server.
Setting up using NIB Setup Tool (TCP/IP)
A
Log on to the file server as an ad-
ministrator or administrator
equivalent.
B
Start NIB Setup Tool from the
[ Start ]
menu.
C
Click [ Wizard ] , and then click [ OK ] .
D
Select the printer you want to con-
figure, and then click
[ Finish ] .
A dialog box prompting you to
perform the remaining configura-
tion tasks in the Web browser ap-
pears. Click
[ OK ] , and then wait
until Web Image Monitor starts au-
tomatically.
E
A dialog box for entering the
[ User
Name ] and [ Password ] appears.
Enter the user name and pass-
word, and then click
[ OK ] .
Note
❒
For details about the password,
consult your network adminis-
trator.
F
Click [ Configuration ] in the left ar-
ea, click
[ Network ]
, and then click
[ NetWare ] .
Note
❒
For details , see p.53 “Setting Up
as a Print Server (NetWare
3.x)”.
G
Confirm the settings, and then
click
[ Apply ] .
Configuration is now complete.
Wait several minutes before re-
starting Web Image Monitor.
Setting up using NIB Setup Tool (IPX)
A
Log on to the file server as an ad-
ministrator or administrator
equivalent.
B
Start NIB Setup Tool on the [ Start ]
menu.
C
Click [ Wizard ] , and then click [ OK ] .
D
Select the printer you want to con-
figure.
E
Enter the printer name in the [ De-
vice Name: ] box and a comment in
the [ Comment ] box, and then click
[ Next > ] .
F
Select the [ NetWare ] check box,
and then click [ Next > ] .
G
Click [ NDS mode ] , enter the file
server name in the [ File Server
Name: ] box, the NDS tree name in
the [ NDS Tree ] box, and the context
in the [ NDS Context: ] box, and then
click [ Next > ] .