manualshive.com logo in svg

Lanier FAX 3320L, Руководство по эксплуатации

Поделиться
Скачать
Lanier FAX 3320L Скачать руководство пользователя страница 10

4

R

 

WARNING:

 

•

Connect the power cord directly into a wall outlet and never use an 
extension cord.

•

Disconnect the power plug (by pulling the plug, not the cable) if the 
power cable or plug becomes frayed or otherwise damaged.

•

To avoid hazardous electric shock or laser radiation exposure, do 
not remove any covers or screws other than those specified in this 
manual.

•

Turn off the power and disconnect the power plug (by pulling the 
plug, not the cable) if any of the following occurs:

•

You spill something into the machine.

•

You suspect that your machine needs service or repair.

•

The external housing of your machine has been damaged.

•

Do not incinerate spilled toner or used toner. Toner dust might ig-
nite when exposed to an open flame.

•

Disposal can take place at our authorized dealer.

•

Dispose of the used toner cartridge in accordance with the local 
regulations.

•

Keep the machine away from flammable liquids, gases, and aero-
sols. A fire or an electric shock might occur.

•

Connect the machine only to the power source described on the in-
side front cover of this manual. Connect the power cord directly into 
a wall outlet and do not use an extension cord. 

•

Do not damage, break or make any modifications to the power cord. 
Do not place heavy objects on it. Do not pull it hard nor bend it more 
than necessary. These actions could cause an electric shock or fire.

•

If the power cord is damaged (exposure of the core, disconnec-
tion,etc.), contact your service representative to change a new one. 
Operating the machine with a damaged power cord may cause an 
electric shock or fire.

StellaF16_combine_F-EN.book  Page 4  Monday, January 22, 2007  6:59 PM

Содержание FAX 3320L





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды