8
Fig. 9
•
Set the desired temperature for the starting
point of ventilation and hysteresis
(2)
on the
control element
(1)
with a small cross-head
screwdriver.
7
Function test
Fig. 10
•
Higher temperature at the installation site
than setting on the control element.
→
Fans start / Red LED lights up
•
Lower temperature at the installation site
than setting on the control element.
→
Fans stop / Red LED goes out
(e.g. outdoor temperature 20 °, setting on
the control element 15 °. Fans run until the
control temperature of 15 ° is reached)
Note:
Selector switch must be set to COOL and RUN, otherwise the switch-on point (heating or
cooling) is inverted!
Note:
Fitting air filters in the inlet of the fans reduces the control performance of the assembly.
1
2
