3 / 4
Connecting an RF Cable to the HR Probe
Required tools:
-
Torque wrench 8 mm (5/16 inch) / 0.9 Nm (8 in.-lbs.)
-
Open-end wrench 1/4 inch
Please check the connectors. All connectors must be undamaged, clean and
within mechanical specification.
1. Push the connectors straight together so that they can engage smoothly (do
not tilt or twist).
2. Turn only the plug nut until it is hand-tight and make sure that you do not cross
the threads.
3. Use the torque wrench to make the final connection. Tighten the connection to
full torque. Use the open-end wrench to prevent the probe from rotating.
