5
Chap
ter 3
3 Design and Function
A conversion kit is needed in order to connect them in series. This includes an actuation bolt
(pos. 7) inserted in the through-hole between the plates, as well as two connectors (pos. 8).
If the plates are attached with these, they must be secured with the enclosed cap screws
(pos. 9).
The cover plates (pos.10) included in the kit are then used to cover the screw holes. When
assembled correctly, nothing from the connectors or the cover plates sticks out above the
surface of the Quick•Point
®
Plates.
Description
Item number
Contents
Conversion kit
85700
1 actuation bolt, 2 connectors,
4 cover plates, 4 cap screws
Connector kit
85701
2 connectors,
4 cover plates, 4 cap screws
pos. 7
pos. 8
pos. 9
pos. 10