8
Chap
ter 5
Chap
ter 4
4 Servicing
4.1 Malfunctions/Errors
Do not to exceed the 30 Nm tightening torque.
In addition, clean the Modular Plates, as well as all other components, and
protect from corrosion. The manufacturer assumes no liability for any damage
in this regard.
5 Warnings
5.1 Intended Use
The operating company is responsible for using the product as intended, with caution and
under the appropriate conditions. In the event of improper use, no liability shall be assumed
by the manufacturer, nor shall any refund be provided.
5.2 Personnel Requirements
Operating company responsibilities:
Only trained personnel with the relevant background knowledge (specializing in
metal), e.g. CNC operators, are authorized to work with the product.
Personnel responsibilities with regard to installation, commissioning, operation,
maintenance and repair must be clearly defined.
Trainees may work with the product only when supervised by an experienced
professional (specializing in metal) or by a CNC operator.
5.3 Personal Protective Equipment and Safety of Personnel
Personal protective equipment (work clothes and non-slip safety footwear, gloves,
hair net, etc.) must be worn as specified in the guidelines and regulations of the
employer’s liability association and the operating company. Obtain information from
your employer’s safety officer.