Lang ECCO-PP, Установка, эксплуатация и обслуживание

Страница: 15 / 24

Operation cont'd.
16
ENTER COOKING CURVE
0 TO 100%
NOX T1 XXXF C XX
XX:XX:XX PXXX FX
ENTER FAN SPEED
1=HI 2=LOW
NOX T1 XXXF C XX
XX:XX:XX PXXX FX
ENTER FAN PULSE RATE
1=HI 2=LOW
NOX T1 XXXF C XX
XX:XX:XX PXXX FX
CONTINUE TO TIER 2
1=YES 2=NO
NOX T1 XXXF C XX
XX:XX:XX PXXX FX
SELECT PRODUCT OR
READ/CLEAR TO
PROGRAM
XX: XX: PM XXX FX
A. SET TIME
B. SET DATE
C. PROGRAM PRODUCTS
D. NEXT MENU
NOTE
If you do not fill all available characters (i.e. xx: 20:30) the
light on the "E" button will flash and you will need to press
the "E" button to continue to the next screen.
7. Enter the desired cooking curve percentage (i.e. 040 = 40% 050 =
50%.
NOTE
If you do not fill all available characters (i.e. xx: 20:30) the light
on the "E" button will flash and you will need to press the "E"
button to continue to the next screen.
8. Enter either "1" for HI or "2" for low.
NOTE
If you do not fill all available characters (i.e. xx: 20:30) the light
on the "E" button will flash and you will need to press the "E"
button to continue to the next screen.
9. Enter a number from 000 to 100.
NOTE
Any number that you enter between 000 and 100 will be the
amount of time in each one hundred second block that the
fan will be ON during the cooking cycle when heat is OFF.
The fan will always stay ON when the heat is ON.
10. Press button 2. This completes the single Tier programming for the
current product.
NOTE
If you press button 1 at this time, you will initiate Tiered
Programming. This will take you through the same sequence as
outlined above for the next Tier and the screen will display SET
TIME as shown.
To continue programming, start at step 3. If you have completed
your programming press, READ/CLEAR button until the display
shows SELECT PRODUCT.
To begin using your oven, press the appropriate product select
button. Refer to your operations manual for complete cooking
instructions.