Front Panel Controls
6
GH50R-212
GH50R, GH100R
1. INPUT:
1/4" mono jack socket. Connect your guitar here. Use only a good quality instrument cable.
2. CHANNEL 1 DRIVE:
– this control determines the level of drive present in the channel 1 signal. This control should be set in
conjunction with the level of the Master Output control in order to get the level of drive and overall volume you want. Channel 1
Drive is capable of providing significant levels of gain from sparking clean to soulful naturally compressed high-gain. When first
setting Channel 1 up - start with the Drive level set low and the Master Output wound up to it's max and then as you bring the
DRIVE up, dial the Master Output back and listen to the pleasing way the level of drive develops.
CHANNEL 1 PULL BRIGHT:
–
The pull bright feature allows you to add a fixed amount of high-end sparkle to your tone. This can
be used to compensate between the natural tonal characteristics of different guitars – or simply to add some more brilliance to your
tone without the need to adjust your overall EQ. (This is more effective at lower drive settings).
3. CHANNEL SWITCH:
Switches between Channels 1 & 2,
4.
CHANNEL 2 DRIVE:
– The Drive control on channel 2 allows you to set the level of drive in your guitar tone but in contrast
to the Channel 1 this has a volume control associated with it. This means that you have the opportunity to get even more tonal
variations when you use both of these controls in conjunction with the Master Output control. Try experimenting with settings
which have the Volume and Master Output in a variety of positions without changing the level of gain and listen to the subtle
variations in tone. Set the Master Volume to the maximum whilst dialling back the Channel 2 volume control. Now try the controls
in the opposite positions. These settings have subtle differences and understanding the way these controls interact is the key to
getting the best tone out of your setup.