NOTE
This manual has been written for easy access of information. The front and
rear panels are graphically illustrated, with each control and feature numbered.
For a description of the function of each control feature, simply check the
number with the explanations adjacent to each panel.
Your Laney amplifier has undergone a thorough two stage, pre-delivery
inspection, involving actual play testing.
When you first receive your Laney amplifier, follow these simple procedures:
(i)
Ensure that the amplifier is the correct voltage for the country it is to be
used in.
(ii)
Connect your equipment with a high quality shielded cable. You have
probably spent considerable money on your amplifier and equipment - don’t
use poor quality cable, it won’t do your gear justice.
Please retain your original carton and packaging so in the unlikely event that
some time in the future your amplifier should require servicing you will be
able to return it to your dealer securely packed.
Care of your Laney amplifier will prolong it’s life.....and yours!
CAUTION:
WARNING:
Intended to alert the user to the presence of high ‘Dangerous Voltage’ within the products enclosure that may be sufficient to constitute a risk of electrical
shock to persons.
Intended to alert the user of the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
Risk of electrical shock - DO NOT OPEN. To reduce the risk of electrical shock, do not remove the cover. No user serviceable parts inside. Refer servicing
to qualified personnel.
To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance please read the operating instructions.
If your appliance features a tilting mechanism, please use this
design feature with caution. Due to the ease with which the
amplifier can be moved between straight and tilted back
positions, only use the amplifier on a level, stable surface.
DO NOT operate the amplifier on a desk, table, shelf or
otherwise unsuitable non-stable platform.
After unpacking your amplifier check that it is
factory fitted with a three pin ‘grounded’
(or
earthed) plug. Before plugging into the power
supply ensure you are connecting to a grounded
earth outlet.
If you should wish to change the factory fitted
plug yourself, ensure that the wiring convention
applicable to the country where the amplifier is
to be used is strictly conformed to. As an
example in the United Kingdom the cable
colour code for connections are as follows.
5