Landxcape BL-MOTOR Скачать руководство пользователя страница 14

Страница: 14 / 40

4. Understanding Your Landxcape

Congratulations on your new purchase of Landxcape

and welcome

to the care-free life of automatic mowing. In the following, we want to
help you to better understand how your Landxcape

thinks.

4.1 How does my Landxcape

know what

to mow?

Landxcape

chooses its direction at random. It will make sure your

entire lawn is evenly mowed without leaving unattractive mowing paths
(See Fig. A).

4.2 How does my Landxcape

know

where to go?

Your Landxcape

is made to work on its own. Landxcape

knows

when it needs to go to its charging base to charge, can sense when it is
raining, can stop itself if it senses a problem, and knows to stop, draw
back, and turn around when it bumps into something blocking its path.
Landxcape

will also automatically stop its blade turning disc from

rotating if it is lifted off the ground to prevent an accident.

A. Finding the Charging Base

When your Landxcape

needs to recharge, it will stop mowing and

follow the boundary wire in an anti-clockwise direction back to its
charging base. Landxcape

is pre-programmed to mow the grass near

the boundary wire twice a week. By default, Landxcape

will mow

near the boundary wire every Monday and Friday after it is powered on.
If you don’t want to enable boundary cut, deactivate it via your
smartphone (only for specific model, please check Technical Data &
Declaration of Conformity).

B. Rain Sensors (only for specific model, please check Technical

Data & Declaration of Conformity)

Landxcape

is equipped with a rain sensor which detects rain and tells

Landxcape

to stop mowing and follow the boundary wire back to its

charging base (See Fig. B).
Landxcape

will resume mowing after passing the delay time. The

default delay time is 180mins. The delay time setting can be changed
via Landxcape

APP (only for specific model, please check Technical

Data & Declaration of Conformity).
When the rain sensors are wet, Landxcape

returns to its charging

base. When the rain sensors are dry, Landxcape

will begin the

delay time countdown. If you want to exit from the rain delay, dry the
sensor area, and perform a power cycle by operating the on/off key.
After the power cycle has been performed, you can operate again.
Or you can activate or deactivate the rain delay by using mobile App
(only for specific model, please check Technical Data & Declaration of
Conformity).

C. Sensing the boundary wire

Landxcape

always obeys the border set by the boundary wire and

uses sensors at its front to detect it. (See Fig. C)

D. Starting and stopping while mowing (See Fig. D, E1, E2)

To start mowing, press the on/off key and input the PIN code. Press
, then press

. If you would like Landxcape

to stop mowing, simply

press the STOP button on top of the mower.
If Landxcape

senses something is wrong, it will display a fault message

on the display. For information on these messages, refer to the Error
Messages. Landxcape

will turn off if it does not receive any input from

the user within 20 minutes.
To resume:
• Press , then press

•

Now Landxcape

will begin to mow!

4.3 Setting

First please set the height to a desired grass level after cut (manually).
And you can do the program setting manually or using mobile App
(only for specific model, please check Technical Data & Declaration of
Conformity).

NOTE:

When doing the program setting manually, Landxcape

will

enter the standby page if it does not receive any input from the user
within 30 seconds.

(1)Change PIN code

To change the PIN code, keep pressing both

and

buttons at the

same time for 5 seconds. The icon

will be blinking, and “

” will be rolling flashing. After that, the first number will be blinking, use

to input the old PIN code and press

to confirm. The next number

will be blinking. Use the same method to complete other numbers. Then,”

” will be rolling flashing , the first number will be blinking and

use

to select the number you want and press

to confirm.

The next number will be blinking. Use the same method to complete other
numbers. For example, the new PIN code is set to be 0326. After that, “

” will be rolling flashing and the first number will be blinking again.

Use the same method to input the new PIN code you set just now (in this
example,

). Then “

” will be rolling flashing on the

display. Your PIN code has been changed successfully.

Only for reference

(2) Set year, date and time

Set year, date and time are compulsory setting items. If you don’t set
these items, it will influence the schedule time in the following setting.
These items should be set in the order of year, date and time. For the year
setting, keep pressing

for 3 seconds until the icon and a number

are blinking on the display, for example,

. Use

select the year you want. Then press

to confirm to finish the year

setting.