Landxcape BL-MOTOR, Руководство пользователя

Страница: 13 / 40

EN 13
Start
1) After the boundary wire installation, you can start using Landxcape
TM
(Please refer to Installation Guide for boundary wire installation).
2) Press until Landxcape
TM
turns on. For the first use, input the default PIN code 0000 by pressing for four times when the number 0 is
blinking. (The PIN code can be changed, please refer to “4.3 Setting”).
NOTE:
Landxcape
TM
will turn off if it does not receive any input within 30 seconds after it is turned on. If you enter wrong PIN code three times,
Landxcape
TM
will raise the alarm “di-di” and then turn off.
3) Press , then press to start mowing.
4) Press then to make Landxcape
TM
go to the charging base, with the blades rotating to cut grass on the way home.
Landxcape
TM
will work continuously until reaching low battery power level and then it will return to the charging base. Once charging is complete,
Landxcape
TM
will automatically resume mowing or it stay in the charging base according to the mowing schedule.
NOTE:
When Landxcape
TM
turns on, all lights on the display will be illuminated and then turn off. Check if there is any light damaged. It is
recommended to shield the display with your hand when the outdoor light gets too strong.
POWER ON/OFF
Turns Landxcape
TM
on
and off
LOCK
BATTERY CAPACITY
Working
time
Wi-Fi
START
Starts mowing/
Selects up
STANDBY PAGE:
Landxcape
TM
is not in the
working hours.
SLEEP PAGE:
The icon is displayed.
Landxcape
TM
is fully charged and is
not in the working hours.
DISPLAY
Displays the state of your setting
STOP
Stops Landxcape
TM
during
operation
HOME
Sends Landxcape
TM
to
its charging base during
operation with the blades
rotating to cut grass
on the way home and
activates charging/Selects
down
OK
Confirms any setting/Enters
Wi-Fi connection mode
3. Control panel