L&W Compressors LW 100 E, Руководство по эксплуатации

Страница: 52 / 154

Page A - 50
A
LW 100 Series
Version: 29.03.2016
Oil / water separators 2nd stage - maintenance
Maintenance / cleaning of oil / water separators 2nd stage as follows:
• Loosen mounting screws (Fig. 1) and pipe connections (Fig. 2).
• Remove oil/water separator
• Use a suitable tool to turn off and remove separator head (Fig. 3)
• Loosen plastic nut (Fig. 4), change sinter filter (Fig. 5) and screw in plastic nut.
• Change o-ring, previously grease new o-ring (Fig. 6)
• Place separator head into the housing, turn in and tighten
• Connect pipe connections and tighten (Fig. 2).
• Mount and tighten mounting screws (Fig. 1)
The oil / water separator maintenance is now completed.
M A I N T E N A N C E A N D S E R V I C E
Fig. 4 - Plastic nut Fig. 6 - Change o-ring Fig. 5 - Change sinter filter
Fig. 1 - Loosen mounting screws Fig. 3 - Turn off and remove
separator head
Fig. 2 - Loosen pipe connections
Note
Clean all parts thoroughly before assembly.
i