L&T Electrical & Automation Duomatic, Руководство по установке

Страница: 12 / 20

12
Installation and placement of toilet
L&T ® Duomatic can be installed in an existing or new building. On the toilet cardboard package you will find a tem-
plate you can use to outline the required apertures for the walls and floors of the building. The toilet can be installed
directly on bearing soil ground, but we do recommend installation on top of lightweight blocks in order to facilitate
servicing and ascertain sufficient ventilation.
It is important to make sure that the toilet is installed on an even ground. We recommend installation on non-freezing
gravel bedding.
1. Cut out the templates on the L&T
®
Duomatic box and use them to outline placement of the apertures on the floor
and wall. Use a jigsaw to cut along the lines.
2.
Detach the rear cover of the toilet. Take out the inside container and the lid to facilitate installation.
3. Install the toilet chassis. We recommend that you place 50 mm light-weight gravel blocks under the toilet to
secure ventilation.
4.
Fix the toilet chassis to the toilet building using the 25 mm screws included in the package.
5. Make sure that the evaporation plate is tightly fixed and that the insect net at the ventilation opening fits tightly.
6. Put the composting containers in place and check that the screen plates are placed correctly (on top of net,
below fabric). Add a layer of some 5 cm of L&T Bio-Life ® drying agent at the bottom of the containers.
7. Fix the rear cover.
8. Fasten the overflow/seepage hose and connect it to the seepage canister. The seepage canister should be dug
into the ground. PLEASE NOTE! Seepage must not be drained directly into the ground!
9. Install the 110 mm sewer/ventilation pipe (not included in the package, available at hardware stores).
The pipe end must be placed at least 70 cm above the ridge of the building.
10.
Put the front cover and the thermal seat in place.
11. The product is ready for use. Always close the thermal seat cover after use to make sure not to disturb the
efficient ventilation of the toilet, and to ascertain proper operation.
UK
1
8
4
9
7
10
2 3