L&R PC3, Руководство владельца/оператора

Страница: 10 / 28

10
Attaching the Drain Assembly for 310 and 650 models

Pick up drain assembly supplied and loosen nut on
elbow.

Position machine so that you are facing the drain tube.

Carefully slide the assembly over the drain tube.

Adjust the position of the drain tube as desired. (Drain right, left or
down.)

Hand tighten nut. Do not over-tighten. If further
tightening is needed an adjustable or a 1 inch open-ended wrench is
recommended.
Recessed Machines
Installing the Tank in Your Countertop
Your recessed ultrasonic cleaner is designed to be a permanent
installation into a countertop in your office or shop. It is recommended
that the stainless steel mounting rim supplied with the cleaner be
installed between the rim of the tank and the countertop to ensure a
good, watertight seal at the countertop. A cable or cables (depending on
the model) will connect the tank to the generator.
1. Select your desired location for the tank on your countertop. Close
proximity to a sink is desirable for ease of drain connections.
a. Make sure there are no drawers below your selected position on the
countertop and that there are doors which allow easy access to the
drain valve on the tank.
b. If the cable(s) interconnecting the tank and generator can not be
routed behind the countertop, a separate hole will have to be drilled in
the countertop to accommodate them.
Vertical position - valve closed
Horizontal position - valve open
Valve Handle
Drain Assembly
Drain Tube