Landoll Brillion SS4, Руководство оператора

Страница: 51 / 56

MAINTENANCE
4-7
TABLE OF CONTENTS
Agitator Box Slide
Adjustment
When the Agitator Box Slide is properly adjusted, the
following should occur.
•
When the Shifter Handle is set to “0” (closed), the
Agitator Box bottom opening end edge is aligned with
the Slide opening end edge.
See Figure 4-9.
Figure 4-9: Shifter Handle Set at “0”
• When the Shifter Handle is set to “6” (open), the
Agitator Box bottom opening end edges are aligned
with the Slide opening end edges. Agitator Box bottom
opening is completely visible.
See Figure 4-10.
Figure 4-10: Shifter Handle Set at “6”
Adjusting the Agitator Box Slide
1. Loosen the Shifter Handle Wing Nut and move the
Shifter Handle until the Slide opening edge is aligned
with the Agitator Box bottom opening edge. The
Agitator Box opening should be completely closed.
2. The Shifter Handle should be at “0” and the opening
in the bottom of the Agitator Box should be completely
closed. If not, loosen the hardware that attaches the
Shifter Plate to the Agitator Box. Move the Shifter
Plate slightly until the Shifter Handle reads “0” in the
triangular cutout.
3. Re-tighten the Shifter Plate Hardware.
4. Check that the Shifter Handle functions properly in
relationship with the Shifter Plate.
• Shift the Shifter Handle to “0”. The Agitator Box
bottom opening should be fully closed. See
Figure 4-11.
• Shift the Shifter Handle to “6”. The Agitator Box
bottom opening should be completely open. See
Figure 4-12.
5. Set the Shifter Handle to “0”. Tighten Shifter Handle
Wing Nut.
Figure 4-11: Shifter Handle Position at "0"
Figure 4-12: Shifter Handle Position at "6"
Opening end
edges aligned
Slide Opening Seed Box
Bottom Opening
Seed Box
Bottom Opening
Opening end edges aligned
Slide Opening
Seed Box bottom opening
completely closed. Box and
Slide opening end edges aligned
Set to "0"
Shifter
Plate
Shifter
Plate
Hardware
Slide
Wing
Nut
Shifter Handle
Seed Box bottom opening completely open.
Box and Slide opening end edges aligned.
Set to "6"
Shifter
Plate
Hardware
Slide
Shifter
Plate
Shifter
Handle
Wing
Nut