Landoll Brillion SS4, Руководство оператора

Страница: 44 / 56

3-18 7K555-2401
OPERATION
TABLE OF CONTENTS
Transporting the Seeder
1. Check and follow all federal, state, and local
requirements before transporting the Seeder.
2. The Seeder should be transported only by tractor
required for field operation. The machine weight
should not exceed more than 1.5 times the tractor
weight. Maximum transport speed for the Seeder is
20 mph.
CAUTION
3. Slow down when driving on rough roads. Reduce
speed when turning, or on curves and slopes to avoid
tipping. Equipment altered other than the place of
manufacture may reduce the maximum transport
speed. Additional weight, added tanks, harrowing
attachments, etc. may reduce machine load carrying
capabilities.
4. Know the transport height and width of the implement
being transported. Use caution when transporting
near bridges and power lines.
DANGER
DANGER
5. Check to see that the tractor hitch capacity or Skid
Steer operating capacity is rated to carry the weight of
the Seeder.
Refer to Tractor or Skid Steer
Operator’s Manual.
6. Use pins and bushings that properly fit the Tractor Lift
Arms or Quick Hitch.
7. Always visually inspect the Skid Steer Mounting Plate
Locking Pins to make sure that they are fully engaged
into the Seeder Quick Attach Plate.
8. Tractor: Raise the Seeder to full transport height.
Skid Steer: Raise the Seeder enough to clear the
ground, but not to obstruct the view of the Skid Steer
operator.
9. Verify that SMV sign, reflectors, and Safety Decals
are clearly visible and tractor or Skid Steer lamps are
functioning properly.
10. Transport during daylight hours whenever possible.
Always use tractor or Skid Steer flashing warning
lights, except where such use is prohibited by law.
Make sure lights, reflectors and SMV emblem are
clearly visible and operating. Remove any
obstructions such as dirt, mud, stalks or residue that
restricts view before transporting.
See Figure 3-20.
Figure 3-20: SMV Sign
Excessive speed may result in loss of control of
the tractor and implement, reduced braking
ability, or failure of the implement tire or structure.
Do not exceed the implement maximum specified
ground speed regardless of the capability of the
maximum tractor speed.
Stay away from power lines when transporting,
extending implement. Electrocution can occur
without direct contact.