manualshive.com logo in svg

Landoll Brillion SL10, Руководство оператора

Поделиться
Скачать
Landoll Brillion SL10 Скачать руководство пользователя страница 28

2-14

1P342-0621

ASSEMBLY

Acre Meter Kit - Optional

P/N 5K745 - Transmission w/o Clutches 

NOTE

The Acre Meter Kit consists of three main parts, the Acre 
Meter, the Pick-Up Switch and the Magnet Wheel 
Assembly. The Acre Meter Assembly is mounted on the 
left side of the Front Seed Box.

IMPORTANT

Alignment of the Pick-Up Switch and the Magnet 
Wheel Assembly is critical. Improper alignment will 
cause the Acre Meter to record acres erratically or 
not at all.

1. Use the Acre Meter Bracket as a guide and drill two 

13/32" holes into the left Seed Box. 

2. Attach the Acre Meter Bracket to the Seed Box with 

3/8-16 x 1 Bolts, Lock Washers and Nuts. 

See 

Figure 2-18.

3. Attach the Pick-Up Switch Bracket to the front of the 

Transmission with 3/16 x 1-1/4 Bolts, Lock Washers 
and Nuts.

4. Attach the Pick-Up Switch to the top of the Pick-Up 

Switch Bracket/Mount with two #8-32 x 1-1/4 
Machine Screws, Flat Washers, Lock Washers and 
Nuts. Do not tighten Screws at this time. 

5. Press the Magnet Wheel Assembly onto the 

Transmission Shaft until it is vertically centered with 
the Pick-Up Switch.

6. Adjust the Pick-Up Switch and Pick-Up Switch 

Bracket so the centerline of the Magnet Wheel 
Assembly and Pick-Up Switch are horizontally and 
vertically aligned with maximum 1/8" between the 
Magnet Wheel Assembly and Pick-Up Switch. 
Tighten all Screws. 

See Figures 2-19.

Figure 2-18:  Electronic Acre Meter

Pick-Up 
Switch
Bracket

Pick-Up 
Switch

  Adhesive
    Mount

Acre Meter

Bracket

Lock Washer,#8
Nut,#8-32

Screw,#6-32 x 1/2

Magnet Wheel

     

Assembly

Screw,#8-32 x 1-1/4

Flat Washer,#8

Bolt,

3/8-16 x 1-1/4

Nut,3/8-16

Lock Washer,3/8

Bolt,3/8-16 x 1
Flat Washer,3/8
Lock W

,3/8

asher

Nut,3/8-16

Содержание Brillion SL10













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды