Landoll Brillion FPS-6, Руководство оператора

Страница: 20 / 42

2-10 2P102
OPERATION
Seed Rate Calibration
See Figures 2-21 and 2-22 for detailed seed rate
calibration instructions. The wrench provided with the
machine can be used for calibration purposes.
Figure 2-21: Front Meter Box
Figure 2-22: Rear Agitator Box
Machine May Be Calibrated For Unlisted Seeds As Follows:
1. Remove Exposed Klik-pin Behind Seedbox To Disconnect Roller.
2. Place A Canvas Or Tarp On The Ground To Catch Seed.
3. Set Seeder On Ground With Seedbox Over Tarp.
4. Turn 5/8” Hex On Transmission 62 Revolutions Ccw. (ccw Based
On Operator Standing Beside Seeder Facing Hex Shaft)
5. Weigh Seed And Multiply By 10. This Is The Approx Pounds/acre.
17 Tooth Driver
(roller Axle)
23 Tooth Driven
10 Tooth Driver
26 Tooth
Driven
Meter Box
Drive
Take-up
Klik-pin
Disconnect
5/8 Hex On
Frame Exterior
37 Tooth
Driven
Take-up
17 Tooth Driver
(roller Axle)
23 Tooth Driven
Take-up
10 Tooth Driver
10 Tooth Driver
37 Tooth Driven
5/8 Hex On Frame
Exterior
Klik-pin
Disconnect
23 Tooth Driven
Agitator Box Drive
Meter Box
Drive
26 Tooth
Driven
Take-up
Machine May Be Calibrated For Unlisted Seed As Follows:
1. Remove Exposed Klik-pin Behind Seedbox To Disconnect Roller.
2. Place A Canvas Or Tarp On Ground To Catch Seed.
3. Set Seeder On Ground With Seedbox Over Tarp.
4. Turn 5/8 Hex On Transmission 62 Revolutions Ccw. (ccw Based
On Operator Standing Beside Seeder Facing Hex Shaft)
5. Weigh Seed And Multiply By 10. This Is The Approx Pounds / Acre.