Landoll Brillion CPPR2-5, Руководство оператора и каталог запасных частей

Страница: 21 / 48

OPERATING INSTRUCTIONS
9D990-2401 3-3
TABLE OF CONTENTS INDEX
Transport
1. Check and follow all federal, state, and local
requirements before transporting the Chisel Plow.
2. The Chisel Plow should be transported only by tractor
required for field operation. The machine weight
should not exceed more than 1.5 times the tractor
weight. Maximum transport speed for the Chisel Plow
is 20 mph.
CAUTION
3. When towing equipment in combination, the
maximum equipment ground speed shall be limited to
the lowest specified ground speed of any of the towed
machines.
Maximum transport speed shall be the lesser of travel
speed specified in the operator's manual, speed
identification symbol, information sign of towed
equipment, or limit of road conditions.
4. Slow down when driving on rough roads. Reduce
speed when turning, or on curves and slopes to avoid
tipping. Equipment altered other than the place of
manufacture may reduce the maximum transport
speed. Additional weight, added tanks, harrowing
attachments, etc. may reduce machine load carrying
capabilities.
5. Before transporting:
• Know the transport heights and widths of the unit
before transporting. Use caution when
transporting near bridges and power lines.
DANGER
• Raise the machine to full transport height.
• Check that tires are of proper size, load rating,
and inflated to manufacture specifications before
transporting. Check wheel lug bolts to ensure
tightness.
See "Tires" on page 4-2.
• Verify that all warning lights, SMV sign,
reflectors, and safety decals are clearly visible
and functioning properly.
• Transport during daylight hours when ever
possible. Always use flashing warning lights,
except where such use is prohibited by law.
Make sure lights, reflectors and SMV emblem
are clearly visible and operating. Remove any
obstructions such as dirt, mud, stalks or residue
that restricts view before transporting.
See
Figure 3-2.
Figure 3-2: SMV Sign
Excessive speed may result in loss of control of
the tractor and machine, reduced braking ability,
or failure of the implement tire or structure. Do not
exceed the implement maximum specified ground
speed regardless of the capability of the
maximum tractor speed.
Stay away from power lines when transporting,
extending machine. Electrocution can occur
without direct contact.