Landoll Brillion CPP7, Руководство оператора

Страница: 41 / 46

MAINTENANCE
4-3
NOTE
When replacing or reversing points, change all points at
the same time so that they will have the same operating
depth. If some shanks have worn points, or points of a
different design, the chisel plow will not operate
efficiently.
Storage
1. The service life of the Chisel Plow will be extended
by proper off-season storage practices. Prior to
storing the unit, complete the following procedures:
a. Completely clean the unit.
b. Inspect the machine for worn or defective parts.
Replace as needed.
c. Repaint all areas where the original paint is worn
off.
d. Grease all exposed metal surfaces of shanks
and points.
e. Apply a light coating of oil or grease to exposed
cylinder rods to prevent them from rusting.
f. Lubricate each point of the machine as stated in
“Lubrication Points and Intervals” on
page 4-4.
2. Store the unit in a shed or under a tarpaulin to protect
it from the weather. The ground tools and tires should
rest on boards, or some other object, to keep them
out of the soil.
3. If the unit is stored in the folded position, make sure
the transport lock pins are installed to prevent
settling.
4. Relieve Hydraulic Pressure in hoses after locks are
installed.
5. Block wheels before unhitching from tractor.