Landoll 875-18, Руководство оператора

Страница: 54 / 64

4-4 TRANSPORT
4-4.1 Raise the unit to full transport height.
4-4.2 Fold the wings.
IMPORTANT
WHEN FOLDING OR UNFOLDING WINGS, OP-
ERATE TRACTOR ENGINE AT A SLOW IDLE
ON 15’F UNITS AND A FAST IDLE ON 18’, 21’,
25’-’6" UNITS, AND HOLD HYDRAULIC VALVE
ON TRACTOR OPEN TO ASSURE SMOOTH OP-
ERATION.
4-4.3 Place the transport lock brackets on the
rods of the lift cylinders on the main frame
and pin in place. (See Figure 4 -3).
WARNING
FAILURE TO USE TRANSPORT LOCK
PINS DURING TRANSPORT MAY RE-
SULT IN PERMANENT EQUIPMENT
DAMAGE, SERIOUS INJURY, OR
DEATH.
IMPORTANT
WHEN TRANSPORTING FARM IMPLEMENTS
ON PUBLIC ROADS, IT IS THE RESPONSIBIL-
ITY OF THE OPERATOR TO ABIDE BY STATE
AND LOCAL LAWS CONCERNING WIDE LOAD,
SPEEDS, AND SAFETY LIGHTING EQUIPMENT.
THE SLOW MOVING VEHICLE SIGN CAN BE
ATTACHED TO THE IMPLEMENT WHEN NEC-
ESSARY.
4-5 FIELD OPERATION
4-5.1 Raise the unit to take the weight off of
the transport locks. Remove the transport
locks from the lift cylinders (on the main
frame only) (See Figure 4-2) .
IMPORTANT
WHEN FOLDING OR UNFOLDING WINGS, OP-
ERATE TRACTOR ENGINE AT A SLOW IDLE
ON 15’F UNITS AND A FAST IDLE ON 18’, 21’,
25’-’6" UNITS, AND HOLD HYDRAULIC VALVE
ON TRACTOR OPEN TO ASSURE SMOOTH OP-
ERATION.
4-4
Figure 4-3 Frame Lift Cylinders