Landoll 7831, Руководство оператора

Страница: 24 / 36

4-8 F-801-1115 Edition
OPERATION AND MAINTENANCE
Adjusting the Blade Leveler
Without the blade leveler, it is inherent that the left rear
corner blade of the machine would leave a small divot
because there is not any dirt flow to fill the void left by the
left rear blade. The “Blade Leveler” re-directs soil from a
single twenty-two inch cover disc blade. It redirects into
the area mentioned above. The Blade Leveler is
adjustable both in height, angle, and laterally. The cover
disc can be adjusted laterally.
The performance of the blade leveler is a function of both
speed and field conditions (loose dirt present.)
1. It is best to initially adjust the blade to ride at ground
level, with the bottom edge parallel to the ground. If it
is set to high the loose dirt will escape underneath of
the blade and not be delivered to where it is needed.
2. If the ground speed will be ten miles per hour or
more, gap the blade leveler laterally a bit further left
of the left end cap of the left rear gang. It is most
effective when positioned approximately 1” to 1-1/2”
to the left of the left rear gangbar’s left side end cap
(See Figure 4-5.)
Figure 4-5: Adjusting The Blade Leveler
BLADE LEVELER
22” COVER DISC
FIRST REAR 24” BLADE ON LH SIDE
FIRST FRONT 24” BLADE ON LH SIDE
1