Landoll 7130 TO THE MAX, Руководство оператора

Страница: 29 / 39

3-16 LUBRICATION
There are 54 grease points and 4 oil points on
the harrow. Before initial use, make sure these
points are supplied with grease. Lubricate all fit-
tings with a hand grease gun. Use a good grade of
bearing grease. Do not over-lubricate the bearings
- too much grease may damage the bearing seals.
While lubricating the machine, remember to
check frame for structural weaknesses and/or fa-
tigue. Make sure to check all bearings and u-bolts
for damage or wear.
3-16.1 Daily (Every 10 hours)
a.
Wing hinges (4) (See Figure 3-29)
b. Chopper reel bearing housings - outer (6) (1
pump of grease only) (See Figure 3-30)
c. Chopper reel bearing housings - inner (6) (1
pump of grease only) (See Figure 3-31)
d. Tool bearing housings (12) (1 pump of
grease only) (See Figure 3-32)
e. Main frame wheel pivot pins
f. Reel pivot pins
Figure 3-29 Lubrication of Wing Hinges (4) Figure 3-30 Outer Chopper Reel Bearings (6)
(1 Pump of Grease Only)
3-17
Figure 3-31 Inner Chopper Reel Bearings (6)
(1 Pump of Grease Only)
Figure 3-32 Tool Bearing Housings (12)
(1 Pump of Grease Only)