Landoll 4620-24, Руководство оператора

Страница: 43 / 64

OPERATION
F-886-0322 3-13
TABLE OF CONTENTS
Transporting the Folding
Seeder
1. Check and follow all federal, state, and local
requirements before transporting the Folding Seeder.
2. The Folding Seeder should be transported only by a
tractor required for field operation. The implement
weight should not exceed more than 1.5 times the
tractor weight. Unless noted on the implement,
maximum transport speed is 20 mph for the
implement and is designated on the Speed
Identification Symbol (SIS) located on the front of the
implement.
CAUTION
3. Always fully fold Seeder Wings prior to transport.
4. Slow down when driving on rough roads. Reduce
speed when turning, or on curves and slopes to avoid
tipping. Equipment altered other than the place of
manufacture may reduce the maximum transport
speed. Additional weight, added tanks, markers,
harrow attachments, etc. may reduce the implements
carrying capabilities.
5. Before transporting Folding Seeder:
a. Know the height and width of the implement being
towed. Markers, tanks, attachments, etc. can
increase the height and width of the implement.
DANGER
DANGER
b. Check to see that the tractor hitch capacity is
rated to carry the weight of the Folding Seeder
Hitch.
Refer to Tractor Operator’s Manual.
c. Use provided pins that properly fits the Lift Arms
or Quick Hitch and Implement Hitch.
d. Clean all Hydraulic Couplings and attach to
tractor remotes.
e. Connect Brillion Elite Mini Monitor System to
tractor.
f. Connect the Safety Warning Lights 7-Pin Plug
into tractor 7-Pin outlet, routing cord by avoiding
pinch points.
g. Fold the Folding Seeder. Fully raise the Seeder
Rockshaft and 3-PT Hitch.
h. Make sure all transport locks and pins are
installed. Do not depend solely on the implement
hydraulics for transport.
See Figure 3-8.
WARNING
i. Check all tires for proper inflation, and that lug
nuts are properly torqued.
See “Tires” on
page 5-3.
j. Verify that all warnings lights, SMV sign,
reflectors, and safety decals are clearly visible
and functioning properly.
k. Raise the implement parking stands. See
Figure 3-1.
l. Transport during daylight hours whenever
possible. Always use flashing warning lights,
except where such use is prohibited by law. Make
sure lights, reflectors and SMV emblem are
clearly visible and operating. Remove any
obstructions such as dirt, mud, stalks or residue
that restricts view before transporting.
Figure 3-16: SMV Sign and SIS Decal
Excessive speed may result in loss of control of
the tractor and implement, reduced braking, or
failure of the implement tires or structure. Do not
exceed the implement maximum specified ground
speed regardless of the capability of the
maximum tractor speed.
Stay away from power lines when transporting,
extending or folding implement. Electrocution can
occur without direct contact.
Failure to use transport lock pins during
transport may result in permanent equipment
damage, serious injury, or death.
20
mile/h
144193