Landoll 4620-24, Руководство оператора

Страница: 33 / 64

OPERATION
F-886-0322 3-3
TABLE OF CONTENTS
Detaching the Folding
Seeder from Tractor
When unhitching the Folding Seeder from the tractor,
park the seeder on a level area to prevent rolling and
shifting.
1. Fully raise the seeder extending the lift cylinders.
Fully raise tractor 3-PT Hitch. Install Transport Locks.
See Figure 3-8.
2. Lower the Front Parking Jack Stands and Pin in the
parking position. See Figure 3-1. If storing on soft
ground, place boards or plates under the Jack Stands
for a larger foot print.
Figure 3-1: Parking Stand
3. Slowly lower 3-PT Hitch until weight is relieved from
the tractor.
4. At the front of the Folding Seeder Hitch, disconnect
the Elite Mini Tractor Harness and the Seeder Main
Harness 6-Pin Plug connection.
See Figure 2-5. This
allows the Brillion Elite Mini Monitor to stay in the
tractor if so desired.
5. Disconnect 7-Pin Warning Lamp Connector from
tractor.
6. Disconnect the hydraulic hoses and place in the
storage bracket above the hitch.
7. Carefully disconnect the 3-PT Hitch by unlocking
Quick Hitch or removing pins from the lower lift links.
Hydraulic System
WARNING
Figure 3-2: Hydraulic Leak Detection
The Folding Seeder Hydraulic System Hoses are color
coded to aid in identifying the Hydraulic Circuits. An
Identification Decal can be found on the Telescoping
Drawbar Outer Tube.
See Figure 3-3.
Figure 3-3: Hose Identification Decal
Parking Stand
3/4" Pin
Escaping hydraulic fluid can cause serious
personal injury. Relieve system pressure before
repairing, adjusting, or disconnecting. Wear proper
hand and eye protection when searching for leaks.
Use cardboard instead of hands. (See Figure 3-2.)
Keep all components (cylinders, hoses, fittings,
etc.) in good repair.
BLUE - LIFT WHEELS
YELLOW - WING FOLD
BLACK - AUXILIARY