Landoll 345C, Руководство оператора

Страница: 25 / 64

3-15 DOCK LEVELER CONTROL
3-15.1 To activate the dock level hydraulic cir-
cuit, turn the lever on the driver’s side of the
trailer bed near the front up to the engage
position.
3-15.2 The DOCK LEVELER CONTROLS are
located under the deck, on the driver’s side,
between the axles (See Figure 3-6) . The
front-most control adjusts the cylinder on the
driver’s or street side of the trailer. The rear-
most control adjusts the cylinder on the
curb-side of the trailer. Both controls have
three position.
IN When the control for either cylinder
is pushed in, toward the center of the
trailer, the corresponding side of
trailer is lowered.
CENTER This position is neutral for either con-
trol. When either control is in this po-
sition, there is no effect on either cyl-
inder.
OUT When the control for either cylinder
is pulled out, away from the center of
the trailer, the corresponding side of
trailer is raised.
3-15.3 After completion of dock level, turn the
lever down to the disengage position.
3-13
Figure 3-6 Dock Leveler Controls